Extra-Wide Power Lift Recliner Chair for Elderly Comfort and Mobility

Introduction

For many older adults and people with limited mobility, a chair is more than a place to sit. It can become the center of daily relaxation, reading, conversation, television viewing, and recovery. A well-designed chair should therefore provide more than attractive upholstery. It should offer dependable support, intuitive operation, smooth movement, stability, and enough space to accommodate different body types comfortably.

The Extra-Wide Power Lift Recliner Chair for Elderly users is designed around these practical needs. Combining an electric lift function, infinite reclining positions, supportive cushioning, a solid metal frame, and a convenient wired remote, this single-seat recliner provides a balanced solution for comfort and everyday accessibility. Its generous proportions make it particularly suitable for users who find standard recliners too narrow or restrictive.

Unlike a conventional armchair, this power lift recliner helps the user move between sitting, reclining, and standing positions with reduced physical effort. Unlike a basic lift chair, it also emphasizes relaxation through an overstuffed backrest, cushioned arms, high-density foam, and a supple camel-colored leather-match finish. The result is a functional chair that can serve as both a mobility aid and an inviting piece of home furniture.

Manufactured by Anji Xuanbo Household Co., Ltd., the chair reflects the company’s experience in functional sofas, recliners, lounge chairs, fixed sofas, corner sofas, love seats, and leisure chairs. The manufacturer combines product development, industrial design, frame production, sponge processing, assembly, quality control, and export logistics to create furniture suited to international markets.

Extra Wide Power Lift Recliner Chair for Elderly

Product Overview

The Extra-Wide Power Lift Recliner Chair for Elderly users is a powered single sofa designed to support a wide range of seated positions. With the wired controller, the user can activate the lift mechanism or adjust the backrest to achieve a preferred position. The motorized system is intended to make movement smoother and more controlled than manually pushing against a fixed footrest or attempting to stand from a low, soft sofa.

The product is supplied as one power lift chair and requires assembly. Its assembled dimensions are approximately 32.3 inches in length, 35.8 inches in width, and 40.6 inches in height. These proportions provide a substantial seating presence without occupying the same amount of space as a large multi-seat reclining sofa. The extra-wide design can offer improved comfort for users who prefer more room around the shoulders, hips, and legs.

The chair is available in camel leather as a standard appearance, with custom colors supported according to project requirements. This flexibility is useful for furniture retailers, hospitality projects, senior-living environments, interior designers, and private-label buyers that need the product to coordinate with specific room themes or brand collections.

Its visual style is modern and approachable. The chair does not rely on an overly institutional appearance, so it can fit naturally into a living room, bedroom, family room, home theater, assisted-living apartment, or recovery area. The combination of a warm camel tone, rounded cushioning, padded arms, and a structured silhouette gives it a residential character while preserving the practical features expected from a mobility-focused recliner.

How the Power Lift Function Supports Daily Mobility

One of the most important advantages of this chair is its power lift capability. Standing up from a low sofa or deep recliner can be challenging for elderly users, people recovering from surgery, or individuals with reduced strength in the legs, hips, or lower back. A powered lifting motion can raise and tilt the chair gradually, helping the occupant move toward a more upright position before standing.

The lift function is controlled through a simple two-button wired remote. The controls are intentionally straightforward, reducing the need to navigate complicated settings or wireless menus. Because the remote is connected to the chair, it is less likely to be misplaced than a small detachable remote. After use, it can be stored in the attached side pocket or positioned nearby for the next adjustment.

A power lift mechanism may also make sitting down easier. Instead of lowering the body abruptly into a deep seat, the user can approach the raised chair and allow the seat to return to a sitting position. This can reduce the need for excessive bending or twisting. Although individual mobility needs differ, the general design principle is to provide more control during transitions between standing and sitting.

The silent electric motor contributes to a calmer experience. Loud mechanical movement can be distracting in bedrooms, shared living spaces, or quiet recovery environments. A quieter motor helps the chair operate with less disruption during reading, resting, or evening use. Smooth powered movement also gives the chair a more refined feel than a basic manual recliner.

The lift feature is not intended to replace professional medical equipment or personal assistance where such support is required. Users should operate the chair according to the instructions and consider their own mobility, balance, and health circumstances. Nevertheless, as a furniture solution, the power lift design provides a meaningful advantage over standard fixed sofas and manual recliners.

Infinite Reclining for Personalized Comfort

The chair offers infinite reclining and sitting positions rather than limiting the user to only one or two fixed angles. This gives users greater freedom to select a posture that suits different activities. A more upright position may be appropriate for conversation, eating, or reading. A partially reclined position can support television viewing or casual relaxation. A deeper reclining position may be useful for resting after a long day.

Personalized positioning is especially valuable because comfort preferences vary. Some users prefer strong support behind the back, while others enjoy a more open posture. A user’s preferred angle may also change throughout the day depending on fatigue, activity, or physical condition. The adjustable power system allows the chair to respond to these changing requirements without requiring the occupant to leave the seat.

Compared with a manual lever recliner, the powered mechanism can reduce the effort needed to change positions. Manual mechanisms often require the user to pull a side lever, shift body weight, or use leg strength to extend and close the footrest. The power system is controlled from the remote, which can be more convenient for users with reduced hand or leg strength.

The infinite-position concept also gives the chair broader household appeal. Although the product is designed with elderly users and people with mobility issues in mind, it can be used by adults of different ages who simply want an adjustable lounge chair. It can function as a reading chair, television chair, relaxation chair, or personal rest station within a larger living-room arrangement.

Extra-Wide Seating and Ergonomic Support

Standard recliners can feel restrictive, particularly for users with broader shoulders, larger frames, or a preference for changing posture frequently. An extra-wide structure provides additional room and can make the chair feel less confining. The 35.8-inch assembled width creates a substantial seating profile while retaining the practical footprint of a single chair.

Additional room can also improve ease of entry and exit. When the user has enough space to position the feet and arms comfortably, it may be easier to prepare for standing or to settle into the seat without repeated adjustments. The padded arms provide places to rest the forearms and may offer useful support while shifting position, although users should not place excessive force on the arms during transfers.

The overstuffed pillow design extends across the back, seat, and armrests. This creates a soft, welcoming appearance while supporting the body at several contact points. The thick backrest is designed to provide a more supportive feel than a thinly padded occasional chair. It can help the user maintain a comfortable seated posture during extended periods of relaxation.

High-density foam and polyester fiber fill are used to create a balance between softness and resilience. Foam provides foundational support, while polyester fiber contributes to a more cushioned, enveloping feel. The use of high-resiliency foam cushions is also intended to help the seating recover after repeated use, supporting better long-term comfort than low-density padding that quickly becomes flat.

Cushioning should always be evaluated in relation to the user’s individual needs. A very soft chair may feel comfortable at first but can make standing more difficult if the body sinks too deeply. This chair’s lift function helps address the transition problem, while the supportive foam construction helps retain a stable seating base beneath the plush exterior.

Backrest and Armrest Design

The thick backrest is one of the chair’s key comfort features. It offers a broad padded area for the back and shoulders, making the chair suitable for extended sitting. The overstuffed profile is intended to create a relaxed feel without abandoning structural support. Padded armrests add comfort for the elbows and forearms and help complete the chair’s full-body lounge design.

For elderly users, comfort is often closely connected with pressure distribution. A properly cushioned back, seat, and armrest can reduce the feeling of concentrated pressure at a single point. The chair’s multiple padded surfaces are designed to distribute contact more evenly, supporting a more pleasant experience during reading, resting, or watching television.

Materials and Construction

The chair uses a solid metal frame to provide stability and strength. A strong internal frame is essential in a lift recliner because the structure must support not only the seated user but also the movement generated during reclining and lifting. The frame serves as the foundation for the motor system, seat, backrest, arms, and upholstery.

Compared with a lightweight occasional chair, a metal-framed lift recliner is better suited to repeated mechanical movement. The frame must remain sufficiently stable while the chair changes position. A stable base can also help reduce unwanted shifting during normal use. The chair’s structural design is therefore an important part of its value, even though it is concealed beneath the upholstery.

The exterior is described as camel leather, with leather-match cleaning guidance provided for the product. The warm neutral color can complement wood furniture, modern neutral interiors, traditional living rooms, and contemporary apartment décor. Custom color support gives buyers additional opportunities to coordinate the chair with upholstery programs or complete sofa collections.

High-density, soft, and odor-free sponge materials are used in the cushions. The intention is to provide a comfortable surface without an unpleasant material odor. Cushion construction affects not only first impressions but also how the chair performs over time. Properly selected foam can improve resilience, reduce premature flattening, and help the chair maintain a more consistent seating feel.

The combination of a metal frame, powered mechanism, resilient foam, polyester fiber fill, padded arms, and durable upholstery creates a multi-layer construction approach. Each component serves a different purpose: the frame supports the structure, the motor enables movement, the foam supports the body, the fiber fill adds softness, and the cover contributes to appearance and everyday usability.

Advantages Compared with Competing Recliners

The market includes many types of recliners, from inexpensive manual chairs to premium electric models. This product distinguishes itself by combining several features that are often separated across different price and product categories.

Advantage One: Lift and Recline in One Chair

Some chairs provide a comfortable reclining function but do not assist with standing. Others offer a lift mechanism but use basic padding and limited reclining positions. This chair combines both capabilities. The same motorized system supports the user during position changes while also providing a flexible reclining experience.

Advantage Two: Extra-Wide Comfort

Many standard recliners prioritize compact dimensions. That can be useful in small rooms, but it may leave broader users feeling compressed. The extra-wide format gives users more personal space and supports a more relaxed posture. It is particularly useful for buyers looking for a chair that feels generous without purchasing a full sofa.

Advantage Three: Simple Wired Operation

Complex electronic furniture can be frustrating for users who prefer uncomplicated controls. The two-button wired controller offers a direct operating experience. A wired remote is also easy to locate and can remain in the attached side pocket when not in use. This practical approach may be preferable to a remote that depends on batteries, pairing, or a wireless signal.

Advantage Four: Full-Body Padding

Some competing lift chairs have firm, functional forms that prioritize mechanism access over lounge comfort. This model uses an overstuffed pillow design across the back, seat, and arms. The result is a softer and more residential appearance, making the chair suitable for everyday living spaces rather than only designated care areas.

Advantage Five: Quiet Electric Movement

A quiet motor can improve the overall user experience. It allows the chair to move with less noise during nighttime use, rest periods, or shared activities. Smooth and quiet operation can also make the product feel more refined and less mechanical.

Advantage Six: Customizable Appearance

Color customization is valuable for importers, distributors, furniture retailers, and project buyers. Rather than limiting the product to a single fixed finish, the manufacturer can support custom color requests. This allows the chair to be integrated into coordinated furniture programs or adapted to different regional market preferences.

Advantage Seven: Manufacturing Integration

The manufacturer’s own wooden frame factory and sponge processing plant provide greater control over important components. Vertical coordination can improve communication between design, material selection, production, and quality inspection. It may also support more consistent lead-time planning and more responsive customization than a business that relies entirely on external suppliers.

Manufacturing Capabilities of Anji Xuanbo Household Co., Ltd.

Anji Xuanbo Household Co., Ltd. was established in 2021 in Anji County, Huzhou City, Zhejiang Province. The region is widely associated with chair manufacturing and has developed a broad industrial ecosystem supporting furniture materials, components, production equipment, skilled labor, packaging, and export services.

The company operates a factory of approximately 8,000 square meters and employs more than 100 people. Its business model integrates research and development, industrial design, large-scale manufacturing, independent marketing, and technical services. This integrated structure allows the company to approach furniture as a complete product system rather than as an isolated upholstery item.

The company’s product range includes functional sofas, fixed sofas, corner sofas, lounge chairs, recliner sofas, love seats, leisure chairs, and lift chairs. Experience across these categories can support the development of products with coordinated design language and compatible manufacturing processes. It also allows the company to understand how individual seating products fit into broader residential and commercial furniture collections.

Research and Development

Research and development is important for functional furniture because comfort must be combined with mechanical reliability. A lift recliner requires attention to the relationship between the frame, motor, seat, backrest, footrest, upholstery, and control system. Changes to one component can affect the others. A strong development process evaluates the chair as a complete operating product.

Industrial design contributes to the chair’s appearance, proportions, usability, and market suitability. The modern silhouette helps the product appeal to consumers who want mobility assistance without bringing an overly clinical look into the home. The company’s design capabilities also support custom color development and potential adaptation for different customer programs.

Frame and Sponge Processing

The company’s own wooden frame factory and sponge processing plant provide important supply-chain advantages. Although this particular product is built around a solid metal frame, internal control over furniture components strengthens the company’s general production capabilities and its ability to coordinate different product types.

Sponge processing is especially important in upholstered furniture. Foam density, resilience, cutting accuracy, and consistency influence the final comfort and appearance of the chair. By managing sponge-related production more directly, the manufacturer can better coordinate cushion specifications with the chair’s design requirements.

Frame production also affects dimensional accuracy and assembly quality. A properly prepared frame provides a stable foundation for upholstery and mechanical installation. Better control of frame components can reduce irregularities, support repeatable production, and make it easier to develop modified versions for different markets.

Multi-Stage Quality Inspection

The company emphasizes strict multi-stage quality inspection. In functional seating, quality assurance should extend beyond the finished appearance. Upholstery, stitching, frame stability, cushion filling, remote operation, motor movement, reclining action, packaging, and final dimensions all influence customer satisfaction.

Inspection at several stages can help identify problems before the chair reaches final packing. Early checks may focus on incoming materials and structural components. In-process checks can review assembly, padding, mechanism installation, and upholstery alignment. Final checks can assess appearance, operating functions, dimensions, and packaging readiness.

This approach is particularly important for export furniture. A product may travel long distances, pass through multiple logistics stages, and be assembled by a distributor or end customer. Consistent pre-shipment inspection helps reduce the possibility of avoidable issues after delivery.

International Market and Export Strength

Anji Xuanbo serves customers in North America, Europe, the Middle East, and other regions. International distribution requires more than production capacity. It requires attention to packaging, documentation, communication, product consistency, customization, and shipment coordination.

The company’s location near Ningbo Beilun Port provides a logistical advantage for export operations. Access to a major port can support more efficient transportation planning and help connect factory production with overseas distribution networks. For international buyers, reliable logistics can be as important as the product itself because delivery timing affects inventory, retail launches, and project schedules.

The manufacturer states that its products are developed to comply with international market standards and certifications. Buyers should confirm the specific certifications, electrical requirements, testing documentation, and applicable regulations for the destination country before placing an order. Electrical lift chairs may require market-specific plugs, voltage specifications, labeling, safety tests, and user documentation.

Export experience also helps the company understand that buyers in different regions may have different expectations regarding dimensions, upholstery colors, packaging, assembly instructions, motor systems, and warranty support. Customization capabilities allow the chair to be positioned for different retail channels and consumer groups.

Applications in Residential and Commercial Settings

Home Living Rooms

In a home living room, the chair can serve as a personal comfort seat for an older family member or anyone who values powered adjustment. Its camel upholstery can function as a warm accent against neutral walls, wood flooring, fabric sofas, or darker furniture. As a single-seat product, it can be positioned beside a sofa, near a window, or in a quiet corner.

Bedrooms and Recovery Areas

The chair may also be suitable for bedrooms, guest rooms, or recovery areas where a user needs a comfortable place to sit without relying on a bed. The lift function can make it more practical for users who find it difficult to stand from a low chair. Before installation, buyers should ensure that the room has sufficient clearance for reclining and lifting movement.

Senior-Living Environments

For senior-living residences, the product can offer a more residential alternative to basic institutional seating. Its soft upholstery, full padding, and modern design can help create a comfortable environment while the powered lift function addresses common mobility concerns. Facility managers should evaluate cleaning requirements, electrical access, floor protection, traffic patterns, and maintenance procedures before selecting the chair for larger installations.

Hospitality and Contract Projects

Hotels, wellness facilities, rehabilitation environments, and private rest areas may also consider power lift recliners for selected spaces. Custom colors can support interior design schemes. For commercial projects, buyers should request detailed specifications covering usage frequency, motor performance, upholstery care, packaging, replacement parts, and after-sales service.

Installation, Operation, and Everyday Care

The chair requires assembly. Buyers should follow the supplied assembly instructions and verify that all components are securely connected before use. The chair should be placed on a level surface with adequate clearance around the back, sides, and front. Cables should be positioned so they do not create a tripping hazard or become trapped in the moving mechanism.

The remote should be stored in the attached side pocket when not in use. Keeping the controller in one consistent location makes operation easier and reduces the risk of loss. Users should press the buttons deliberately and allow the chair to complete its movement without attempting to force the backrest, footrest, or lift mechanism manually.

Routine care helps preserve the chair’s appearance and performance. The provided care guidance identifies fabric cleaning code S, which indicates cleaning with dry-cleaning solvent only, and leather-match cleaning code P, for which professional dry cleaning is recommended. Because upholstery materials and finishes can vary, users should always consult the final care label and perform a spot test in an inconspicuous area before applying any product.

Furniture should be protected from direct sunlight, heating outlets, and air-conditioning outlets. Prolonged exposure to strong sunlight may cause color changes, while concentrated heat or cold air may affect upholstery materials over time. Keeping the chair away from these sources can help maintain its appearance and reduce unnecessary material stress.

Spills should be addressed promptly using the appropriate cleaning method. Rubbing aggressively may spread the stain or damage the surface. Users should avoid unapproved household chemicals, excessive moisture, abrasive tools, and improvised treatments. For commercial applications, a documented cleaning schedule and staff training can help ensure consistent care.

Product Specifications

Specification	Details
Product type	Power lift recliner chair
Recommended users	Elderly users, people with mobility limitations, and adults seeking powered reclining comfort
Configuration	One single sofa chair
Color	Camel leather; custom colors supported
Control system	Wired two-button remote controller
Movement	Power lift and infinite reclining and sitting positions
Frame	Solid metal frame
Motor	Silent electric motor for smooth lift operation
Cushion materials	High-density foam, high-resiliency foam, polyester fiber fill, and soft high-density sponge
Storage	Attached side pocket for magazines and remote control
Assembly	Required
Assembled length	32.3 inches
Assembled width	35.8 inches
Assembled height	40.6 inches

Why Manufacturing Integration Matters to Buyers

Furniture buyers increasingly evaluate suppliers according to more than unit price. They want dependable quality, flexible customization, transparent communication, stable capacity, and practical support throughout the order cycle. A manufacturer with integrated capabilities can often coordinate these needs more effectively.

Control over frame and sponge processing helps reduce dependence on fragmented sourcing. When product design changes, the factory can coordinate material specifications and production methods more directly. When a buyer requests a custom color or modified configuration, a unified production team may be able to evaluate the request more quickly.

In-house or closely controlled processes can also support better cost management. The company describes full-chain cost and capacity control as one of its advantages. This can be important for wholesalers and retailers that need a competitive landed cost while maintaining acceptable product quality.

Production scale is another consideration. With approximately 8,000 square meters of factory space and more than 100 employees, the company has a foundation for handling both standard products and larger orders. Capacity should always be confirmed for a specific project, but the available infrastructure indicates an organized manufacturing operation rather than a small trading-only business.

Technical services and independent marketing further support long-term cooperation. International buyers may need assistance with product specifications, packaging requirements, color development, documentation, and communication between purchasing and production teams. A supplier that can participate in these activities provides more value than a factory that only produces against a fixed drawing.

Purchasing Considerations for Distributors and Retailers

Distributors considering this product should first define their target customer. The chair may appeal to elderly consumers, family caregivers, adults with limited mobility, and general consumers seeking a comfortable power recliner. Clear positioning can influence upholstery selection, packaging, instruction materials, retail photography, and after-sales support.

Room dimensions should also be considered. Although the chair is a single-seat model, its extra-wide structure and reclining movement require sufficient surrounding space. Retailers should provide customers with the assembled dimensions and recommend measuring doorways, hallways, elevators, and the intended room before ordering.

Electrical compatibility must be confirmed for the destination market. Buyers should request information about voltage, frequency, plug type, power consumption, electrical safety testing, and replacement control components. If the chair is sold internationally, user instructions should be available in the required languages and should explain safe operation, assembly, clearance, and care.

Packaging is another important factor. A powered recliner contains mechanical and electrical components that should be protected during transportation. Buyers can ask about carton construction, internal protection, moisture control, drop testing, stacking limits, and spare-part availability. These details can reduce damage risk and support more efficient warehouse handling.

For private-label or customized programs, buyers may discuss color, upholstery, logo placement, packaging artwork, instruction manuals, product labels, and order quantities. The manufacturer’s customization capability can help create a product line that feels distinct while retaining the underlying lift recliner platform.

Safety and Responsible Use

Users should read the assembly and operating instructions before using the chair. The product should be placed on a stable, level surface, and children should not operate the mechanism without appropriate supervision. The chair should not be used if the power cord, controller, motor, or frame appears damaged.

Care should be taken to keep hands, feet, clothing, pets, and loose objects away from moving areas. The mechanism should be allowed to operate freely. Users should not sit on the arms, stand on the footrest, or exceed the recommended weight capacity. Buyers should request the applicable weight rating and electrical safety information for the specific production model.

The lift function is designed to assist movement, but it does not guarantee that every user can stand independently. People with serious balance limitations or medical conditions should consult a qualified healthcare professional or caregiver when selecting and using mobility-support furniture.

Proper placement is also important. The chair should not block emergency exits, essential walkways, or access to other furniture. In a senior-living or care environment, staff should inspect the operating area regularly and ensure that cords are secured without restricting the chair’s movement.

Q&A

What is the main purpose of this power lift recliner?

The chair is designed to provide comfortable reclining while helping the user transition toward a standing position through a powered lift mechanism. It is especially suitable for elderly users and people who experience difficulty standing from a conventional low chair.

Does the chair recline to only one fixed position?

No. The product provides infinite reclining and sitting positions, allowing users to select a preferred angle for reading, conversation, television viewing, resting, or relaxation.

How is the chair controlled?

A wired two-button remote controller operates the lift and reclining functions. The remote can be stored in the attached side pocket when it is not being used.

Is the chair suitable for a larger user?

The extra-wide design provides more seating room than many standard recliners. However, buyers should compare the chair’s dimensions and the manufacturer’s applicable weight rating with the user’s individual requirements before purchase.

What materials provide the chair’s comfort?

The chair uses high-density and high-resiliency foam, polyester fiber fill, and soft high-density sponge materials. These components are combined with an overstuffed backrest, seat, and padded armrests.

What supports the chair’s structure?

A solid metal frame provides the structural foundation. This frame is intended to offer stability and strength while supporting the powered lift and reclining functions.

Is the motor noisy?

The chair is equipped with a silent electric motor designed for smooth lift operation and reduced operating noise. Actual sound levels may vary depending on flooring, installation, room acoustics, and use conditions.

What color is available?

The standard color is camel leather. Custom colors are supported, subject to project requirements, material availability, and order conditions.

Does the chair require assembly?

Yes. Assembly is required. The chair should be assembled according to the supplied instructions, and all connections should be checked before operation.

How should the upholstery be cleaned?

The provided care guidance identifies cleaning code S for fabric, meaning dry-cleaning solvent only, and code P for leather match, for which professional dry cleaning is recommended. A spot test should always be performed before cleaning, and buyers should follow the final product care label.

Where should the chair be placed?

The chair should be placed on a level surface with sufficient clearance for lifting and reclining. It should be kept away from direct sunlight, heating outlets, and air-conditioning outlets. The power cord should be arranged safely to prevent tripping or entanglement.

Can the chair be supplied for international markets?

The manufacturer exports furniture to North America, Europe, the Middle East, and other regions. International buyers should confirm destination-specific electrical specifications, certifications, labeling, documentation, packaging, and warranty requirements before ordering.

What makes the manufacturer suitable for customized orders?

The company combines research and development, industrial design, manufacturing, technical services, and independent marketing. Its stated advantages include customization capabilities, integrated frame and sponge production resources, multi-stage quality inspection, export logistics, and experience serving international customers.

Conclusion

The Extra-Wide Power Lift Recliner Chair for Elderly users combines mobility assistance with the comfort and appearance of a modern home recliner. Its powered lift mechanism can support easier transitions between sitting and standing, while infinite reclining positions allow users to select a posture suited to different daily activities.

The product’s extra-wide proportions, thick backrest, padded arms, high-density foam, polyester fiber fill, and resilient sponge construction focus on long-lasting comfort. A solid metal frame provides a stable foundation, and the silent electric motor supports smooth operation. The wired controller and attached side pocket add practical convenience without introducing unnecessary complexity.

Compared with basic manual recliners, the chair offers more accessible movement and more flexible positioning. Compared with purely functional lift chairs, it offers a softer, more residential design with customization options for color and upholstery programs. These combined features make it suitable for homes, senior-living spaces, recovery rooms, hospitality environments, and furniture retail collections.

The manufacturing capabilities of Anji Xuanbo Household Co., Ltd. strengthen the product’s commercial potential. The company’s approximately 8,000-square-meter factory, workforce of more than 100 employees, product development resources, frame and sponge processing capabilities, multi-stage quality inspection, and export experience provide a foundation for consistent production and international cooperation.

For buyers, the chair represents a practical intersection of comfort, accessibility, customization, and manufacturing control. With proper assembly, safe placement, appropriate operation, and regular care, it can become a dependable seating solution for users who want greater independence and relaxation in everyday life.

References

1. Product specification and care information supplied for the Extra-Wide Power Lift Recliner Chair for Elderly, product code 8056.

2. Manufacturer profile and company information supplied for Anji Xuanbo Household Co., Ltd.

3. General principles of ergonomic seating design and pressure distribution in upholstered furniture.

4. General guidance for powered recliner operation, furniture clearance, electrical safety, and responsible use.

5. General upholstery care principles for fabric, leather-match, foam, and polyester-filled furniture.

Product: Extra Wide Power Lift Recliner Chair for Elderly